What products need to comply with NCC certification?

1. Low-power radio frequency motors with operating frequencies from 9kHz to 300GHz, such as: wireless network (WLAN) products (including IEEE 802.11a/b/g/n/ac/ax), UNII, Bluetooth products, RFID, ZigBee, Wireless keyboards, wireless mice, wireless earphones and microphones, radio walkie-talkies, radio remote control toys, various radio remote controls, various wireless anti-theft devices, etc.

​

2. Public switched telephone network equipment (PSTN) products, such as wired telephones (including VOIP Internet phones), automatic alarm equipment, answering machines, fax machines, remote control devices, wired telephones and wireless master and slave units, and touch-tone telephone systems , data equipment (including ADSL equipment), incoming call display terminal equipment, 2.4GHz radio frequency telecommunications terminal equipment, etc.

​

3. Land mobile communication network equipment (PLMN) products, such as wireless broadband access mobile station equipment (WiMAX mobile terminal equipment), third, fourth and fifth generation mobile communication terminal equipment (ex, 3G, 4G, 5G mobile phones), etc.

​

What are the categories of NCC product certification?

1. Telecommunications Terminal Equipment

Scope: Public Land Mobile Network (PLMN)

Applicable standards: Technical specifications for mobile communications and telecommunications terminal equipment (all PLMN projects)

 

New Radio (NR) Terminal Equipment (Frequency Band FR1) (PLMN12)

Narrowband terminal equipment (PLMN11)

Long Term Evolution (LTE) Terminal Equipment (PLMN10)

Wideband code division multiplex access frequency division duplex (WCDMA FDD) terminal equipment (PLMN08)

New Radio (NR) Terminal Equipment (Frequency Band FR2)

 

2.Controlled Telecommunication Radio-Frequency

2-1.Scope:Low-power radio-frequency devices

Applicable standards: Technical specifications for low-power radio frequency equipment (LP0002)

project:

Low-power radio frequency equipment with an operating frequency below 1GHz, except wireless information transmission equipment or equipment using frequency hopping or digital modulation

Low-power radio frequency equipment with an operating frequency exceeding 1GHz, except for wireless information transmission equipment or equipment using frequency hopping or digital modulation

Wireless information transmission equipment or low-power radio frequency equipment using frequency hopping or digital modulation

Low-power radio frequency equipment projects that implement a simplified declaration of conformity in accordance with the NCC announcement (telecommunications controlled radio frequency equipment projects that implement a simplified declaration of conformity)

2-2.Scope:Mobile Broadband Base Station Radio Frequency Equipment

Applicable standards: Technical specifications for mobile communication base station radio frequency equipment (IS all projects)

 

New Radio (NR) Base Station RF Equipment (Band FR1) (IS2051)

Long Term Evolution (LTE) base station radio frequency equipment (IS2050)

Wideband Code Division Multiple Access (WCDMA) base station radio frequency equipment (IS2038)

New Radio (NR) Base Station RF Equipment (Frequency Band FR2)

​

What are the categories of telecommunications terminal equipment products?

1.) Public switched telephone network equipment (PSTN) wired telephones (including VOIP Internet telephones), automatic alarm equipment, answering machines, fax machines, teletypewriters, remote control devices, wired telephones and wireless master and auxiliary machines, users Prepare your own private exchange, key phone system, computer telephone integration equipment, data equipment (ADSL terminal equipment and splitter), incoming call display terminal equipment, 2.4GHz radio frequency telecommunications terminal equipment, DS1/T1/E1 terminal equipment, etc.

​

2.) Land mobile communication network equipment (PLMN) radio calling system terminal equipment, mobile data terminal equipment, relay wireless telephone, GSM mobile phone and terminal equipment, DCS1800 mobile phone and terminal equipment, third generation Mobile communication terminal equipment.

​

3.) Integrated Services Digital Network (ISDN) ISDN digital telephone, ISDN PC add-on card, ISDN G4 fax machine, ISDN video telephone, ISDN terminal adapter, ISDN terminal adapter module, ISDN PABX, others ISDN user terminal equipment, etc.

​

What products do low-power radio frequency products include?

Wireless network (WLAN) products (such as IEEE 802.11a/b/g/n), UMII, Bluetooth products, RFID (125kHz~134kHz, 13.56MHz, 27MHz, 922MHz~928MHz, 2.4GHz, 5.8GHz), ZigBee , wireless keyboard, wireless mouse, wireless headset microphone, radio intercom, radio remote control toys, various radio remote controls, various wireless anti-theft devices, Family Radio Service (FRS), etc.

​

What is the format of the NCC conformity mark? What are the precautions for label production?

1. There is no fixed size specified. It should be labeled or printed on the device body in an appropriate proportion. There is no maximum/minimum size requirement. The principle is to be clear.

2. This NCC mark, together with the certification number, should be attached to the product in accordance with regulations. Its color and frequency should be single and must be clear and easy to identify.

3. Handle in accordance with Article 16 of the Measures for Inspection of Telecom Terminal Equipment and Article 16 of the Measures for Inspection of Telecommunications Controlled Radio Frequency Equipment.

4. If the main body is too small to be marked, it should be marked on the smallest unit package.

5. For telecommunications terminal equipment, telecommunications control equipment and cable radio and television terminals that have been inspected and approved by the center, the manufacturer submitting for inspection should make their own labels according to the inspection certificate/conformity statement label format provided in the approval certificate/audit certificate. It can only be sold if it is affixed or printed on the appropriate position of the device body.

6. In order to meet the needs of Taiwan's trade facilitation customs clearance, the inspection and certification label format for telecommunications controlled radio frequency equipment and telecommunications terminal equipment will be revised as follows from January 1, 1995: From January 1, 1994, low-power products that obtained inspection and approval numbers before December 31, 1994 For radio frequency motors and wireless telecommunications terminal equipment, if it is necessary to convert the inspection number to the new coding method of 1995 (customs clearance code).

 

Precautions:

Conclusions of the 78th Consistency Meeting-Announcement Manual Marking (Proposal No. 11001471)

Conclusion of the 78th Conformance Meeting - Announcement of body marking verification label or declaration of conformity label and its model (Proposal No. 11001472)

​

NCC conformity label or declaration of conformity label format production example (low power radio frequency equipment)?

CC: is a fixed code used to distinguish the type of equipment imported for customs declaration.

XX: Table verification agency (institution) code

xx: table year: 2019 is represented by 19, 2020 is represented by 20, and so on.

YY: table equipment type:

LP: low power radio frequency equipment

Y1: Complete RF module (component)

Y2: Restricted RF module (component)

yyy: table serial number: increasing sequentially from 001~999 to AAA~ZZZ each year.

Z: Table series number:

0: Non-series products with type certification; 1-9 or A-Z: Series products with table type certification.

Z: table verification method:

T: Type Approval; C: Declaration of Conformity; E: Simple Declaration of Conformity

W: Check code

​

Example of NCC conformity label or declaration of conformity label format production (telecom terminal equipment)?

CC: is a fixed code used to distinguish the type of equipment imported for customs declaration.
XX: Table verification agency (institution) code
xx: table year: 2019 is represented by 19, 2020 is represented by 20, and so on.
YY: table equipment type:
3G: WCDMA FDD terminal equipment;
4G: LTE terminal equipment;
5G: NR terminal equipment;
B1: xDSL telecommunications terminal equipment;
B2: Telecommunications terminal equipment with modem function;
BS: cable broadcast and television terminal equipment;
C1: Telecommunications terminal equipment with incoming call display function;
E1: 1880MHz to 1895MHz wireless private switching system and terminal equipment;
F1: Telecommunications terminal equipment with fax machine function;
GS: mobile satellite terminal equipment;
HA: Telecom terminal equipment with hearing aid function;
I1: ISDN user telecommunications terminal equipment;
IP: fixed communication multimedia content transmission platform terminal equipment;
K1: Telecommunications terminal equipment with touch-tone telephone system function;
M1: Telecommunications terminal equipment with modem function;
MD: mobile data device;

​

NB: narrowband terminal equipment;
OP: Other PSTN functional products;
P1: Telecom terminal equipment with switch function;
PL: personal positioning radio beacon;
R1: Telecommunications terminal equipment with line telephone, wireless master and slave functions;
R2: 2.4GHz telecommunications terminal equipment;
S1: DS1 telecommunications terminal equipment;
SS: satellite small earth station;
T1: Telecommunications terminal equipment with telephone function;
Y0: Non-plug and play restricted communication module;
Z1: Others….
yyy: table serial number: increasing sequentially from 001~999 to AAA~ZZZ each year.
Z: Table series number:
0: Non-series products with type certification; 1-9 or A-Z: Series products with table type certification.
Z: table verification method:
T: Type Approval; C: Declaration of Conformity; E: Simple Declaration of Conformity
W: Check code

​

What is the NCC certification process?

​1. The client provides product information and provides an evaluation quote.
2. The client confirms the quotation, fills in the application form, and provides samples, materials, etc. to facilitate the case opening.
3. Arrange product testing and review relevant information
4. If there are any problems with the test or related documents, follow-up arrangements will be made for rectification and retesting until the test is qualified.
5. After passing the test, a test report will be issued and the relevant application preparation documents will be attached and submitted to the certification authority for review.
6. The issuing agency will issue a qualified NCC certificate after passing the review (without any discussion) and provide it to the client.
7. Provide the NCC certificate and test report electronic files and invoices to the client to complete the project.

​

Are there any matters that need to be paid attention to in the NCC certification process?

1. Applicants must first conduct testing by themselves at a testing unit recognized by the National Communications Commission (e.g.: Telecommunications Technology Center). After obtaining the test report, submit the application form and technical information to the verification unit (e.g.: Telecommunications Technology Center). Apply for certification.

2. During the execution of the verification service, the applicant is required to agree to provide relevant personal information, including: name, date of birth, unified national identity card number, contact information, etc. This center will keep the aforementioned personal information in a safe place. If you have any needs for access, addition, deletion, or correction, you can write directly to the service mailbox rcb@ttc.org.tw, and our center will handle it for you as soon as possible.

Manufacturers applying for mobile phone inspection should pay attention to the relevant provisions of the Personal Data Protection Act when collecting, processing or using personal data on mobile phones, and inform consumers of the possibility of collecting, processing or using personal data generated by using mobile phones.

​

What documents are required for NCC application?

In accordance with the "Telecommunications Controlled Radio Frequency Equipment Verification and Management Measures" authorized by Article 66, Paragraph 5 of the Telecommunications Management Law, those applying for type certification of telecommunications controlled radiofrequency equipment or non-plug and play radiofrequency modules (components) should attach the following documents Apply to the verification agency (institution) for paper or electronic files:
1. Application form for type certification of telecommunications controlled radio frequency equipment.
2. User manual or instructions in traditional Chinese or English.
3. Specifications in traditional Chinese or English.
4. Circuit diagram or circuit block diagram.
5. Inspection report of equipment samples.
6. Color photos of equipment samples, external power supplies and accessories measuring 4×6 inches or more. The brand and model must be clearly legible. Equipment samples must be six-sided photos.
7. At least two sided color photos of the inside of the equipment sample and the circuit board of 4×6 inches or more with rulers. The main components of the circuit board must be clearly legible.
8. Applicants who are domestic natural persons should submit identification documents, and domestic legal persons, unincorporated groups or foreign manufacturers should submit relevant establishment documents.
9. Other verification-related information requested by the competent authority.
10. Electronic files, including the information in paragraphs 1 to 9.

​

How to check certified radio electronic products on the NCC website? 

Check the type certification inquiry page of the NCC website (https://nccmember.ncc.gov.tw/Application/Fun/Fun016.aspx) to query relevant information about certified radio electronic products. The type certification inquiry webpage contains the brand, model, appearance photos, type certification number and other information of qualified radio electronic products. It is convenient for everyone to check and purchase qualified radio electronic products that have been type certified. Just enter the "type certification number", "manufacturer brand" ”, “Model” or select “Equipment Type” and other query conditions and steps such as “Confirmation Code” to get relevant information.   

​

​