SameSite=Lax
top of page
  • What is the related product standard regarding the product approval?
    Product standard means a rule which defines the test device to be covered in the standard, the test purpose, method, evaluation, process, limitation and others. Its main function is to make sure the product fulfills the national and or international Essential Requirements. Related product standard means a standard which is specifically for the product. For example, CE EN300328 is for a wifi 802.11b product.
  • Can I be the local representative for my product or other company’s product?
    Yes and No. If you have a company which is registered locally inside the approval import country. In normal situation you could represent your or others’ product. However, some countries will check your company scope and confirm rather you have the related scope in your company registration in the target country. Some of countries they request the specific license. Therefore, it depends on the rule locally.
  • 제품 승인과 관련하여 GMA는 무엇을 의미합니까?
    GMA는 글로벌 시장 접근을 의미합니다. 품목허가사업 국제승인 대중적인 승인 이상을 다룹니다. 예: CE/FCC/IC/NCC. GMA는 전 세계 제품 승인을 의미합니다.
  • Why the same product needs to have different product test and approval for each country?
    Available, not available, allowed and prohibited…… radio frequencies are not all harmonized between countries around the world regarding the product approval. This difference was caused by wars in the history. Decoded is the huge issue during wars. So, the first basic solution is to use different radio frequency compares to your opposite party. Once this is the basic and important option for the army. They will occupy these radio frequencies. In general situation then the business and other purpose to use the radio frequency will choose the rest of available radio frequencies. From here it makes the difference and non-harmonized frequencies between countries. You will find some countries have harmonized radio frequency while some have not. One of the main reasons is it was affected by wars.
  • IA는 제품 승인과 관련하여 무엇을 의미합니까?
    IA는 제품의 국제 승인 승인 사업을 의미합니다. 대중적인 승인 이상을 다룹니다. 예: CE/FCC/IC/NCC. 더 쉽게 말하면 IA는 전 세계적인 제품 승인을 의미합니다.
  • 제품 승인 관련 IOT 제품이란?
    IOT, The Internet of Things, 그것은 시장에서 가장 인기있는 주제입니다. 그리고 제품 승인을 위해 IOT는 제품이 다른 장치와 연결, 통신, 제어, 협력 또는 상호 작용할 수 있는 인터넷 네트워크 기능을 가지고 있음을 의미합니다. 제품 승인의 관점에서 볼 때 두 가지 핵심 사항이 있습니다. 1. 장치에 유선 또는 무선 인터넷 기능이 있습니다. 2. 장치가 제품 표준의 여러 범주에 속할 가능성이 높습니다. 예를 들어 IOT 의료 기기입니다. 무선 또는 네트워킹 및 의료 제품 범주에 속합니다. 제품 표준의 두 가지 범주를 충족해야 합니다. 즉, 이 장치가 제품 승인을 받을 때 필요한 테스트와 효율적인 일정을 포함하는지 확인하기 위해 더 나은 테스트 계획이 필요합니다. Glodacert는 제품 승인 경험에서 많은 IOT 고객을 지원했습니다. 귀하의 프로젝트를 지원할 준비가 되어 있습니다.
  • Why frequencies for the wireless product are not harmonized between countries regarding the product approval?
    Yes and No. Yes, you can prepare all the required documents for the approval. And find and fill out the necessary application form. Then send to the citification body. But, in most situation this process is quite complex. And you will face lots of questions, for example, what documents are needed? How details of documents need to be prepared? How to fill out the application form? And who you shall submit your project to? It will take much longer time compare to do it by Glodacert. Furthermore, you mostly cannot perform the test be yourself. Since you need to have an accredited test lab. Therefore, part of the work you can do it by yourself. But it’s not efficient and not easy to do it all by your own.
  • What is debug related to the product test and product approval?
    Debug is an activity as a solution to modify and fix the technical issues during the product test. Product is designed for the best function and performance. However, each import country defines and has its own rules and product standards to control the import prodcuts. The core spirit of rules and product standards are mainly related to the health and safety, electromagnetic compatibility and avoid harmful interference etc. So, there are many possible conflicts may happen during the product test. Therefore, debug is very important topic during the product approval. Since it affects the cost and lead time seriously. Glodacert provides the one stop service to guide you from R&D stage to worldwide approvals. We will be with you through the whole approval process.
  • What is the purpose of wireless test regarding to the product approval?
    The wireless test is a test which a lab refers to the related wireless product standard to perform the test for the wireless part of the product. The test standard will indicate the rules that the test items and evaluations need to be fulfilled. For example, the allowed/prohibited radio frequency and its max transmitting power, the method to evaluate wireless technical character and rather it causes harmful interference or not, etc.
  • 제품 승인과 관련하여 GPC는 무엇을 의미합니까?
    GPC는 글로벌 제품 규정 준수를 의미합니다. 품목허가사업 국제승인 대중적인 승인 이상을 다룹니다. 예: CE/FCC/IC/NCC. 더 쉽게 말하면 GPC는 전 세계적인 제품 승인을 의미합니다.
  • What is a test lab regarding the product approval?
    A test lab is where these products shall be tested. A test lab needs to get its accreditation (for example, ISO/IEC 17025) before its test result can be formally accepted by the certification body. A test lab also has its accredited test scopes. For example, some test labs only can perform wired product (without wireless function) test, while other test labs can perform wired and wireless product test.
  • How to apply the correct product approval to my product?
    Firstly, you should make sure you have the correct product spec. And what import country you would like to sell your product? Then Glodercert will guide you through all necessary procedures. There are key information needs to be confirmed. For example, what is the main function of your product? wireless or wired? who are the targeted users? Where is the main location to use this product? what technology is used in this product? After all these information has been confirmed then we will find out the correct standards to be applied, efficient test plan and all other information related to the product approval.
  • Can I handle the product approval by myself?
    Yes and No. Yes, you can prepare all the required documents for the approval. And find and fill out the necessary application form. Then send to the citification body. But, in most situation this process is quite complex. And you will face lots of questions, for example, what documents are needed? How details of documents need to be prepared? How to fill out the application form? And who you shall submit your project to? It will take much longer time compare to do it by Glodacert. Furthermore, you mostly cannot perform the test be yourself. Since you need to have an accredited test lab. Therefore, part of the work you can do it by yourself. But it’s not efficient and not easy to do it all by your own.
  • What is the product approval?
    Product approval is a process which makes sure the product has fulfilled the related product standard. The product is tested, reported by test a lab and certified by a certification body. This process is called a product approval.
  • Why local representative is required for some countries regarding the product approval?
    Local representative is required when you are an oversea company and would like to get the approval to sell your product into the import country. And just because you are an oversea company if some important notices or issues need to contact you it is not as easy as to contact the local company. Therefore, some countries they request oversea applicants to provide their local representative and act as their local contact window. Some oversea companies they use their branch office. Some choose to use their importer as the local representative while they don’t have a branch office inside the import country. However, this option causes lots of issues and conflicts in our experience. Therefore, to avoid this issue, Glodacert also provides the local representative service. This helps many customers to make their approval much efficient.
  • What is a certification body regarding the product approval?
    A certification body is a company which has got its related accreditation (for example, ISO/IEC 17065). So, it can review the test reports and documents from a test lab and an applicant. Then issue the related certification for the product approval according to the related Essential Requirements and standards. A certification body also needs to get its accreditations for its certificate scopes. For example, some certification bodies can only issue the certificate of US, while others can issue US, Japan and Canada. Some certification bodies can issue the certificate of medical device, but others only can issue the certificate of wireless device. When you plan your product to be approved and certified please do choose the correct certification body.
  • What is the purpose of EMC test regarding to the product approval?
    EMC (Electromagnetic Compatibility). It contains EMI (Electromagnetic interference) and EMS (Electromagnetic Susceptibility). EMI, a product creates it unintentionally while it is in standby or power on mode. For the product itself it is EMI. For other product near it and be affected by EMI. It is EMS. Compatibility in EMC can be described as this example: A party unintentionally punches (EMI) party B (for party B it is EMS). If any party when unintentionally punches the other party. The strength to punch (for example, party A) and the ability to withstand the punch (For example, party B) are all fulfill the rule and standard. Then under the standard / rule it is a compatible world for the electronic products. Products are compatible with others.
  • What is the BIS approval process and rule for TWS Earbuds?
    The TWS Earbuds product falls into two BIS certification categories: 1. Power Bank (the charging case) 2. Wireless Earphone (earbuds) And there are 4 items need to get BIS certificate and must follow the sequence: ​ A. The battery Cell used for Charging case and Earbud: first BIS B. Battery used for charging case and earbud: second BIS >>Please note: If B already certified by BIS then no need to reapply for A and B C. Charging case: third BIS D. Earbud: fourth BIS The reason it has to follow the sequence is due to the critical component’s approval rule.
  • What is the purpose of Safety test regarding to the product approval?
    Safety test is to ensure the product in user’s environment is safe to be used by users. And also, not causes any unsafe situation to the environment around the user according to the product standard. There are many different standards for the safety test. For example, UL, CE, IEC standards. The main purpose is to make sure it is safe to users of the product.
  • What are Essential Requirements regarding the product approval?
    The Essential Requirements mean the basic and most important value for the National and or international product approval. It’s the core spirit. For example, the key items from Essential Requirements of CE wireless product: health and safety, electromagnetic compatibility and avoid harmful interference. It’s just likes a constitution. All laws follow its core spirit. And different laws for different fields. In the product approval all standards follow the Essential Requirements. And different types of products have the specific standards for each of them.
  • What is Taiwan BSMI approval?
    BSMI is the English abbreviation of the Bureau of Standard, Metrology and Inspection (Bureau of Standard, Metrology and Inspection) of the Ministry of Economic Affairs of Taiwan. According to the announcement of the Ministry of Economic Affairs, starting from July 1, 2005, all products produced by domestic manufacturers or imported from abroad will obtain BSMI after passing the inspection. Certificates can only be obtained from domestic market sales displays. Therefore, Taiwan certification is compulsory certification and the National Standard CNS specification of the Republic of China has been formulated to implement electromagnetic compatibility and safety requirements control. What are the products and specifications controlled by BSMI? Please refer to the following link on the BSMI website for electronic item details and specifications: https://www.bsmi.gov.tw/wSite/lp?ctNode=9093&CtUnit=3588&BaseDSD=7&mp=1 BSMI certificates can be divided into the following three types: 1. Type Approved Batch Inspection, TABI Products announced as batch-by-batch inspection items subject to type approval, imported and domestically sold products must first obtain a test report from a laboratory designated by the BSMI and apply for the product type from the BSMI. According to regulations, you must obtain a "Commodity Type Approval Certificate" before submitting for inspection. After obtaining the certificate, you can apply for batch-by-batch inspection with a photocopy of the certificate. 2. Registration of Product Certification, RPC If the product is announced as a verification registration inspection item subject to type approval, imported and domestic products must first obtain a test report from the laboratory designated by BSMI and apply for the product type from BSMI. According to regulations, you must first obtain the "Verification Login Accreditation Certificate" before applying for inspection. After obtaining the certificate, you can apply for verification and login with a photocopy of the certificate. 3. Declaration of Conformity, DOC If a product is announced as a conformity statement inspection item that is subject to type approval, the test should be conducted at a laboratory accredited by BSMI. Relevant technical documents must be prepared, a declaration of conformity signed, and an inspection mark attached to the product. Ready for sale. Updated on 2023.4.24 (based on BSMI Conformance Meeting Minutes in February 2023) The product has been announced as a conformity declaration inspection item subject to type approval: 1. The test report must be issued by the laboratory designated by the Bureau (domestic). It is the type test report of the product. It is no different from the type test report for verification registration or type approval, so it is the one mentioned in the letter of the Bureau dated July 21, 2011. For the scope of type test reports, designated laboratories need to upload type test reports, test records and related technical documents. 2. In addition to uploading type test reports and original test records (raw data) for declaration of conformity cases, the relevant technical documents uploaded must at least include "specific specifications of designated laboratories for information products" and "specific specifications of designated laboratories for electromagnetic compatibility" , "Specific specifications for designated laboratories for electrical and electronic products" and "Specific specifications for designated laboratories for terrestrial digital television receivers" and other technical documents with content requirements. 3. The declaration of conformity will adopt a registration system, that is, before importing goods, the operator must first register through the bureau's system, fill in the 16-digit designated number of the bureau's test report, and check that the designated laboratory has completed the upload of the report before the declaration of conformity can be produced. The certificate must be signed and a customs clearance certificate number must be obtained before importing, so the designated laboratory must upload a test report with a declaration of conformity; this plan is applicable to the inspection regulations for new products to be inspected in the future. Currently, there are no electrical and electronic products that will be inspected for compliance. Declaration of plans for registration system. Note: BSMI stated that since the declaration of conformity is for the industry to ensure that its products meet the standards on its own, the inspection agency is exempted from the intervention of inspection operations, and the pre-market inspection of products is changed to a market supervision management method. Therefore, the Bureau will strengthen the supervision of market products. Conduct random inspections and checks to eliminate products that violate regulations and escape inspection. What are the rules for BSMI label marking (R /D /T ) for verification registration, type approval and declaration of conformity? What are the product inspection fees, annual fees and extension time operations? Registration of Product Certification (RPC) Single model: inspection fee NTD 5,000 yuan; annual fee NTD 5,000 yuan There are series models (minimum of more than two): inspection fee NTD 8,000 yuan, annual fee NTD 5,000 yuan Extension time: once every three years (extended at most once, for a total of six years) (conditional test standards remain unchanged) Product type approval - batch-by-batch inspection (Type Approved Batch Inspection, TABI) Single model: inspection fee NTD 3500; annual fee NTD 0 yuan There are series models (no limit on models): inspection fee NTD 5,000; no annual fee Extension time: unlimited (testing standards remain unchanged) Declaration of Conformity (DOC) Single model or series of models (not limited to models): No inspection fees and annual fees Extension time: No extension required (testing standards remain unchanged) What are the domestic and foreign labs recognized by BSMI for ISO9000: https://www.bsmi.gov.tw/wSite/lp?ctNode=8930&BaseDSD=7&mp=1 How to prepare the application documents for authorized customs clearance import for verification of registration certificate goods? Application document: -"Product Verification Login Application Form", download the verification login stand-alone program from the BSMI website, enter the data and print the output application form. -Verify login application data login program (save the above stand-alone version of the verification login program for inputting application data into a flash drive or burn it to a CD). -Product verification and registration of import customs clearance authorization letter. -A copy of the authorized person's company registration certificate, business registration certificate, factory registration certificate or personal ID card. What documents are required for different types of projects? A) New project: Application documents (ex: product verification registration application form) For-profit enterprise registration certificate Laboratory accreditation documents EMC report/Safety report information B) Series project: Application documents (ex: product verification registration application form) For-profit enterprise registration certificate Laboratory accreditation documents Series cutting book EMC report information/Safety report information C) Verification project: Application documents (ex: product verification registration application form) For-profit enterprise registration certificate Laboratory accreditation documents Approval letter EMC report information/Safety report information D) Extended project: Application documents (ex: product verification registration application form) For-profit enterprise registration certificate Laboratory accreditation documents original certificate
  • What is Taiwan NCC approval?
    NCC is the English abbreviation of The National Communications Commission, formerly known as the General Administration of Telecommunications of the Ministry of Transport. It has been actively participating in APEC TEL MRA related activities promoted by the Asian Pacific Economic Committee on behalf of our country, and was the first to participate in the "First Phase Mutual Recognition of Testing Laboratories and Mutual Acceptance" One of the countries with testing reporting procedures. In order to assist domestic telecommunications operators and build a good domestic certification/verification environment, the NCC revised telecommunications-related regulations and started private organizations to engage in product verification and certification business from January 1, 1991. The main responsibilities are to control the communication and information equipment circulated and used in the Taiwan market: 1. LPE: Low Power Equipment, which is low-power equipment (for example: Bluetooth, WIFI equipment); 2. TTE: Telecommunications Terminal Equipment, which is communication terminal equipment (for example: mobile phones, tablet devices). What products need to comply with NCC certification? 1. Low-power radio frequency motors with operating frequencies from 9kHz to 300GHz, such as: wireless network (WLAN) products (including IEEE 802.11a/b/g/n/ac/ax), UNII, Bluetooth products, RFID, ZigBee, Wireless keyboards, wireless mice, wireless earphones and microphones, radio walkie-talkies, radio remote control toys, various radio remote controls, various wireless anti-theft devices, etc. 2. Public switched telephone network equipment (PSTN) products, such as wired telephones (including VOIP Internet phones), automatic alarm equipment, answering machines, fax machines, remote control devices, wired telephones and wireless master and slave units, and touch-tone telephone systems , data equipment (including ADSL equipment), incoming call display terminal equipment, 2.4GHz radio frequency telecommunications terminal equipment, etc. 3. Land mobile communication network equipment (PLMN) products, such as wireless broadband access mobile station equipment (WiMAX mobile terminal equipment), third, fourth and fifth generation mobile communication terminal equipment (ex, 3G, 4G, 5G mobile phones), etc. What are the categories of NCC product certification? 1. Telecommunications Terminal Equipment Scope: Public Land Mobile Network (PLMN) Applicable standards: Technical specifications for mobile communications and telecommunications terminal equipment (all PLMN projects) New Radio (NR) Terminal Equipment (Frequency Band FR1) (PLMN12) Narrowband terminal equipment (PLMN11) Long Term Evolution (LTE) Terminal Equipment (PLMN10) Wideband code division multiplex access frequency division duplex (WCDMA FDD) terminal equipment (PLMN08) New Radio (NR) Terminal Equipment (Frequency Band FR2) 2.Controlled Telecommunication Radio-Frequency 2-1.Scope:Low-power radio-frequency devices Applicable standards: Technical specifications for low-power radio frequency equipment (LP0002) project: Low-power radio frequency equipment with an operating frequency below 1GHz, except wireless information transmission equipment or equipment using frequency hopping or digital modulation Low-power radio frequency equipment with an operating frequency exceeding 1GHz, except for wireless information transmission equipment or equipment using frequency hopping or digital modulation Wireless information transmission equipment or low-power radio frequency equipment using frequency hopping or digital modulation Low-power radio frequency equipment projects that implement a simplified declaration of conformity in accordance with the NCC announcement (telecommunications controlled radio frequency equipment projects that implement a simplified declaration of conformity) 2-2.Scope:Mobile Broadband Base Station Radio Frequency Equipment Applicable standards: Technical specifications for mobile communication base station radio frequency equipment (IS all projects) New Radio (NR) Base Station RF Equipment (Band FR1) (IS2051) Long Term Evolution (LTE) base station radio frequency equipment (IS2050) Wideband Code Division Multiple Access (WCDMA) base station radio frequency equipment (IS2038) New Radio (NR) Base Station RF Equipment (Frequency Band FR2) What are the categories of telecommunications terminal equipment products? 1.) Public switched telephone network equipment (PSTN) wired telephones (including VOIP Internet telephones), automatic alarm equipment, answering machines, fax machines, teletypewriters, remote control devices, wired telephones and wireless master and auxiliary machines, users Prepare your own private exchange, key phone system, computer telephone integration equipment, data equipment (ADSL terminal equipment and splitter), incoming call display terminal equipment, 2.4GHz radio frequency telecommunications terminal equipment, DS1/T1/E1 terminal equipment, etc. 2.) Land mobile communication network equipment (PLMN) radio calling system terminal equipment, mobile data terminal equipment, relay wireless telephone, GSM mobile phone and terminal equipment, DCS1800 mobile phone and terminal equipment, third generation Mobile communication terminal equipment. 3.) Integrated Services Digital Network (ISDN) ISDN digital telephone, ISDN PC add-on card, ISDN G4 fax machine, ISDN video telephone, ISDN terminal adapter, ISDN terminal adapter module, ISDN PABX, others ISDN user terminal equipment, etc. What products do low-power radio frequency products include? Wireless network (WLAN) products (such as IEEE 802.11a/b/g/n), UMII, Bluetooth products, RFID (125kHz~134kHz, 13.56MHz, 27MHz, 922MHz~928MHz, 2.4GHz, 5.8GHz), ZigBee , wireless keyboard, wireless mouse, wireless headset microphone, radio intercom, radio remote control toys, various radio remote controls, various wireless anti-theft devices, Family Radio Service (FRS), etc. What is the format of the NCC conformity mark? What are the precautions for label production? 1. There is no fixed size specified. It should be labeled or printed on the device body in an appropriate proportion. There is no maximum/minimum size requirement. The principle is to be clear. 2. This NCC mark, together with the certification number, should be attached to the product in accordance with regulations. Its color and frequency should be single and must be clear and easy to identify. 3. Handle in accordance with Article 16 of the Measures for Inspection of Telecom Terminal Equipment and Article 16 of the Measures for Inspection of Telecommunications Controlled Radio Frequency Equipment. 4. If the main body is too small to be marked, it should be marked on the smallest unit package. 5. For telecommunications terminal equipment, telecommunications control equipment and cable radio and television terminals that have been inspected and approved by the center, the manufacturer submitting for inspection should make their own labels according to the inspection certificate/conformity statement label format provided in the approval certificate/audit certificate. It can only be sold if it is affixed or printed on the appropriate position of the device body. 6. In order to meet the needs of Taiwan's trade facilitation customs clearance, the inspection and certification label format for telecommunications controlled radio frequency equipment and telecommunications terminal equipment will be revised as follows from January 1, 1995: From January 1, 1994, low-power products that obtained inspection and approval numbers before December 31, 1994 For radio frequency motors and wireless telecommunications terminal equipment, if it is necessary to convert the inspection number to the new coding method of 1995 (customs clearance code). Precautions: Conclusions of the 78th Consistency Meeting-Announcement Manual Marking (Proposal No. 11001471) Conclusion of the 78th Conformance Meeting - Announcement of body marking verification label or declaration of conformity label and its model (Proposal No. 11001472) NCC conformity label or declaration of conformity label format production example (low power radio frequency equipment)? CC: is a fixed code used to distinguish the type of equipment imported for customs declaration. XX: Table verification agency (institution) code xx: table year: 2019 is represented by 19, 2020 is represented by 20, and so on. YY: table equipment type: LP: low power radio frequency equipment Y1: Complete RF module (component) Y2: Restricted RF module (component) yyy: table serial number: increasing sequentially from 001~999 to AAA~ZZZ each year. Z: Table series number: 0: Non-series products with type certification; 1-9 or A-Z: Series products with table type certification. Z: table verification method: T: Type Approval; C: Declaration of Conformity; E: Simple Declaration of Conformity W: Check code Example of NCC conformity label or declaration of conformity label format production (telecom terminal equipment)? CC: is a fixed code used to distinguish the type of equipment imported for customs declaration. XX: Table verification agency (institution) code xx: table year: 2019 is represented by 19, 2020 is represented by 20, and so on. YY: table equipment type: 3G: WCDMA FDD terminal equipment; 4G: LTE terminal equipment; 5G: NR terminal equipment; B1: xDSL telecommunications terminal equipment; B2: Telecommunications terminal equipment with modem function; BS: cable broadcast and television terminal equipment; C1: Telecommunications terminal equipment with incoming call display function; E1: 1880MHz to 1895MHz wireless private switching system and terminal equipment; F1: Telecommunications terminal equipment with fax machine function; GS: mobile satellite terminal equipment; HA: Telecom terminal equipment with hearing aid function; I1: ISDN user telecommunications terminal equipment; IP: fixed communication multimedia content transmission platform terminal equipment; K1: Telecommunications terminal equipment with touch-tone telephone system function; M1: Telecommunications terminal equipment with modem function; MD: mobile data device; NB: narrowband terminal equipment; OP: Other PSTN functional products; P1: Telecom terminal equipment with switch function; PL: personal positioning radio beacon; R1: Telecommunications terminal equipment with line telephone, wireless master and slave functions; R2: 2.4GHz telecommunications terminal equipment; S1: DS1 telecommunications terminal equipment; SS: satellite small earth station; T1: Telecommunications terminal equipment with telephone function; Y0: Non-plug and play restricted communication module; Z1: Others…. yyy: table serial number: increasing sequentially from 001~999 to AAA~ZZZ each year. Z: Table series number: 0: Non-series products with type certification; 1-9 or A-Z: Series products with table type certification. Z: table verification method: T: Type Approval; C: Declaration of Conformity; E: Simple Declaration of Conformity W: Check code What is the NCC certification process? 1. The client provides product information and provides an evaluation quote. 2. The client confirms the quotation, fills in the application form, and provides samples, materials, etc. to facilitate the case opening. 3. Arrange product testing and review relevant information 4. If there are any problems with the test or related documents, follow-up arrangements will be made for rectification and retesting until the test is qualified. 5. After passing the test, a test report will be issued and the relevant application preparation documents will be attached and submitted to the certification authority for review. 6. The issuing agency will issue a qualified NCC certificate after passing the review (without any discussion) and provide it to the client. 7. Provide the NCC certificate and test report electronic files and invoices to the client to complete the project. NAre there any matters that need to be paid attention to in the NCC certification process? 1. Applicants must first conduct testing by themselves at a testing unit recognized by the National Communications Commission (e.g.: Telecommunications Technology Center). After obtaining the test report, submit the application form and technical information to the verification unit (e.g.: Telecommunications Technology Center). Apply for certification. 2. During the execution of the verification service, the applicant is required to agree to provide relevant personal information, including: name, date of birth, unified national identity card number, contact information, etc. This center will keep the aforementioned personal information in a safe place. If you have any needs for access, addition, deletion, or correction, you can write directly to the service mailbox rcb@ttc.org.tw, and our center will handle it for you as soon as possible. Manufacturers applying for mobile phone inspection should pay attention to the relevant provisions of the Personal Data Protection Act when collecting, processing or using personal data on mobile phones, and inform consumers of the possibility of collecting, processing or using personal data generated by using mobile phones. What documents are required for NCC application? In accordance with the "Telecommunications Controlled Radio Frequency Equipment Verification and Management Measures" authorized by Article 66, Paragraph 5 of the Telecommunications Management Law, those applying for type certification of telecommunications controlled radiofrequency equipment or non-plug and play radiofrequency modules (components) should attach the following documents Apply to the verification agency (institution) for paper or electronic files: 1. Application form for type certification of telecommunications controlled radio frequency equipment. 2. User manual or instructions in traditional Chinese or English. 3. Specifications in traditional Chinese or English. 4. Circuit diagram or circuit block diagram. 5. Inspection report of equipment samples. 6. Color photos of equipment samples, external power supplies and accessories measuring 4×6 inches or more. The brand and model must be clearly legible. Equipment samples must be six-sided photos. 7. At least two sided color photos of the inside of the equipment sample and the circuit board of 4×6 inches or more with rulers. The main components of the circuit board must be clearly legible. 8. Applicants who are domestic natural persons should submit identification documents, and domestic legal persons, unincorporated groups or foreign manufacturers should submit relevant establishment documents. 9. Other verification-related information requested by the competent authority. 10. Electronic files, including the information in paragraphs 1 to 9. How to check certified radio electronic products on the NCC website? Check the type certification inquiry page of the NCC website (https://nccmember.ncc.gov.tw/Application/Fun/Fun016.aspx) to query relevant information about certified radio electronic products. The type certification inquiry webpage contains the brand, model, appearance photos, type certification number and other information of qualified radio electronic products. It is convenient for everyone to check and purchase qualified radio electronic products that have been type certified. Just enter the "type certification number", "manufacturer brand" ”, “Model” or select “Equipment Type” and other query conditions and steps such as “Confirmation Code” to get relevant information.
  • How is BSMI certification important for your business?
    The BSMI mark is a mandatory requirement before your product place to Taiwan market . Glodacert can help you comply with BSMI certification rule and provides assurance that it is in compliance with BSMI requirements and also will not be impounded at port of entry.
  • What are BSMI certification type of electrical and electronic commodities in Taiwan ?
    The certification of electrical and electronic commodities is conducted according to three schemes: 1, Type Approved (TA) - mechanical, chemical, electrical and electronic products (valid for three years). 2, Registration of Product Certification (RPC) - for electrical and electronic products (valid for three years). 3, Declaration of Conformity (DoC) - for components of IT equipment and electronic products (no expiry).
  • What is India TEC?
    Telecommunication Engineering Centre (TEC) TEC is a technical body representing the interest of Department of Telecom, Government of India, prepare specification of common standards regarding Telecom network equipment, services, and interoperability. A TEC certificate is required for telecom equipment dealers to import, manufacture, and sell such equipment. The Telecommunication Engineering Centre issues this TEC certificate after the telecom equipment undergoes testing under the MTCTE (Mandatory Testing and Certification of Telecom Equipment) scheme. How many specifications for telecom equipment quality measures does TEC has? a. Generic Requirements (GRs) b. Interface Requirements (IRs) c. Service Requirements are the three types of specifications (SR). What is MTCTE ? Mandatory Testing and Certification of Telecom Equipment (MTCTE) The Indian Telegraph (Amendment) Act 2017 proposes that all telecommunications equipment exported to India or imported from India must undergo mandatory testing and certification before being used locally in India. All of the above need to be governed by this scheme: the Mandatory Testing and Certification of Telecom Equipment (MTCTE) in India. MTCTE aims to cover 55 telecommunications products, as well as other peripheral products derived from the above product categories. Only by performing tests in accordance with the laboratory regulations designated by TEC can you check whether the basic requirements of the equipment are met. A certificate is issued in accordance with TEC regulations and handled against the test report. Who can be the applicant for TEC? 1. Foreign OEM local Office in India. 2. Brand Owner office in India. 3. Distributor of Products in India. 4. Any third party company in India. What are the requirements for the TEC compliance Process? 1. Indian Manufacturer/Authorized Indian Representative of Foreign OEM/Brand Owner can apply On the TEC Portal. 2. Testing for Safety and EMC/EMI must be done in India at a Designated Lab of TEC, the test report for other Essential Requirements from a ILAC approved lab can be accepted only for some time Phase wise. 3. The testing of the product must be conducted as per the Essential Requirements issued by TEC for different Products. 4. Applicant shall provide TEC approval required documents. What are required documents for testing? 1. TRF: The customer must provide details in the TRF about the Applicant, Manufacturer and Product. 2. CDF/CCL: Will be shared once the product details are received. 3. Complete Installation and Operating User Manual. 4. Circuit Diagram. 5. PCB Layout. 6. Software used if any. 7. Product test set up SOP for EMC/EMI testing. 8. The Presence of a Technical Person of the Applicant Company may be required in lab for 3-4 days to conduct the installation and service support if needed for Technical Requirement testing. What are the document requirements for Indian Applicant Registration/ Indian OEM Registration? 1. Certificate of Incorporation of Indian Applicant Company. 2. Pan Card of the Indian Applicant Company. 3. MOA, AOA and Shareholding Pattern. 4. Authorized Signatory Name and Designation 5. Email address of the Authorized Signatory. 6. Phone Number of the Authorized Signatory. 7. Authorization Letter from the Director of Applicant Company in the name of Authorized signatory. (Annexure 3). What are the document requirements for Foreign OEM Registration? 1. MOU between Foreign OEM and Indian Applicant (AIR): (Annexure 1) 2. Name and address of the factories where the product will be manufactured. 3. AIR Authorization Letter for Indian Applicant. (Annexure 2) 4. Contact person Name and Designation of Foreign OEM. 5. Email id of Contact Person of Foreign OEM. 6. Phone Number of Foreign OEM. What are TEC labelling requirements ? Logo on the body of equipment at a prominent location. Indication of equipment conforming to ERs in its technical document. Certification e-label applicable only in the case of mobile handsets and tablets. The size of TEC logo may be reduced or enlarged maintaining the aspect ratio. What is the validity of TEC certificate? 10 years. Is TEC approval Mandatory? Yes Does TEC need a local testing? Yes Does TEC approval need the local representative? Yes What products are covered under MTCTE? What products are covered under Phase 1 of MTCTE? (TEC will adjust at any time according to the Indian market conditions for the following information and mandatory dates) What products are covered under Phase 2 of MTCTE? (TEC will adjust at any time according to the Indian market conditions for the following information and mandatory dates) What products are covered under Phase 3 of MTCTE? (TEC will adjust at any time according to the Indian market conditions for the following information and mandatory dates) What products are covered under Phase 4 of MTCTE? (TEC will adjust at any time according to the Indian market conditions for the following information and mandatory dates) What products are covered under Phase 5 of MTCTE? (TEC will adjust at any time according to the Indian market conditions for the following information and mandatory dates) D: FAQs: 1. Q: Is there a restriction on the number of associated models that can be included under one family? A: Number of associated models including the main model is restricted to 10 numbers. 2. Q: How many numbers of associated models along with main model can be included in a test report? A: The limit on 9 associated models + 1 main model is for applying on the MTCTE portal in a single application. For remaining associated models, a separate MTCTE application may be submitted with same main model. 3. Q: Will the BIS safety report be acceptable for MTCTE certification? A: Yes, valid BIS cert. or safety report from BIS Recognize labs issued against the Safety test standards as mentioned in the applicable Essential Requirements, under MTCTE scheme and the same may be updated on MTCTE portal against the respective Safety test parameter. 4. Q: What is TEC certificate number? A: A TEC Certificate Number is a unique ID obtained after the certification which can be used on the equipment’s to assure the consumers that the product follows the necessary specifications.
  • What is MSIP approval for Korea?
    MSIP approval is a Korea product approval for Wireless and Telecom products, Such as Earbuds, Bluetooth speakers, Wifi, AP, wireless scanner, Smart phone, IOT etc. It also be known as Bluetooth speakers, Wifi, AP, wireless scanner, Smart phone, IOT MSIP approval. From more details, please visit our website: https://www.glodacert.co/service-country Or contact us: https://www.glodacert.co/contactus
  • What is SIRIM approval for Malaysia?
    SIRIM approval is a Malaysia product approval for Wireless and Telecom products, Such as Earbuds, Bluetooth speakers, Wifi, AP, wireless scanner, Smart phone, IOT etc. It also be known as Bluetooth speakers, Wifi, AP, wireless scanner, Smart phone, IOT SIRIM approval. From more details, please visit our website: https://www.glodacert.co/service-country Or contact us: https://www.glodacert.co/contactus
  • What is NTC approval for Philippines?
    NTC approval is a PHILIPPINES product approval for Wireless and Telecom prodcuts, Such as Earbuds, Bluetooth speakers, Wifi, AP, wireless scanner, cell phone, IOT etc. It also be known as Bluetooth speakers, Wifi, AP, wireless scanner, cell phone, IOT NTC approval
  • What is NBTC approval for Thailand?
    NBTC approval is a Thailand product approval for Wireless and Telecom products, Such as Earbuds, Bluetooth speakers, Wifi, AP, wireless scanner, Smart phone, IOT etc. It also be known as Bluetooth speakers, Wifi, AP, wireless scanner, Smart phone, IOT NBTC approval. From more details, please visit our website: https://www.glodacert.co/service-country Or contact us: https://www.glodacert.co/contactus
  • What is the benefit for me to send my product to be tested and approved in Asia?
    This is a lead time and cost-effective topic. For most of companies they plan to have their product to be launched into the market on schedule. And also, the product approval is almost the last step for the product to the market. Therefore, the budget and lead time are very tight. Asia has huge amount of the OEM/ODM/Manufactories. As the result, there are much more test labs and service companies related to the product approval compare to other countries. Due to the huge number of projects and highly competition the approval business is already very mature in Asia. You have more options for your test schedule, cost, supports and service. We have helped our oversea customers to handle tens of thousands of projects. They were satisfied for the efficient lead time, cost and service.
  • What is ANATEL approval for Brazil?
    ANATEL approval is a Brazil product approval for Wireless and Telecom products, Such as Earbuds, Bluetooth speakers, Wifi, AP, wireless scanner, Smart phone, IOT etc. It also be known as Bluetooth speakers, Wifi, AP, wireless scanner, Smart phone, IOT ANATEL approval. From more details, please visit our website: https://www.glodacert.co/service-country Or contact us: For More Information: https://www.glodacert.co/anatel For More News: https://www.glodacert.co/news/search/anatel
  • What are the 2024 holidays for Africa certification bodies?
  • Post Coming Soon!
  • Post coming soon!
  • Post Coming Soon!
表頭背景_edited.jpg

FAQ

bottom of page